Snatch Block Pulley - 20,000 LB
Description
Use the Rugged Ridge Snatch Block Pulley to double your winch capacity! This durable 8 inch long pulley is constructed from 3/16 inch cold rolled steel and is suitable for use up to 20,000lbs. For use with winch cables up to 3/8 in diameter. The pulley can be used to double the capacity for your winch, or to reduce the strain on the winch motor and your electrical system. For recovery operations were a straight pull is not viable option, the pulley helps change the angle of your pull.
Features
- 20,000 lb capacity 8" pulley made from cold rolled steel
- Works with up to 3/8" cable or rope
- Great for recovery operations on Jeeps and mid-size trucks
- Double the capacity for your winch or reduce strain
- Pair with a Line Damper if using with steel cable (damper not included)
- Limited 5 Year Warranty
Order Notes
WARNING
Because of the pulley's capability to increase your line pull rating, it is important to understand winching basics and know that improper setup can potentially lead to line failure and could cause serious bodily injury. Always use a line dampener when using wire rope and stand clear of the potential danger zone when using a winch with or without a pulley. Also, these pulley blocks are not designed for hoisting. Be sure to read and understand instructions before using any towing or recovery gear. Please give us a call if you have any questions or concerns!
Warranty
RUGGED RIDGE 5 YEAR WARRANTY
When your product is purchased from Omix-ADA®/Rugged Ridge and is not separately warranted by either Omix-ADA® or the manufacturer, then this Limited Warranty gives you specific legal rights and is the only warranty Omix-ADA® makes in connection with your purchase. Omix-ADA® neither assumes nor authorizes any manufacturer, vendor, retailer, other person or entity to assume for it any other obligation or liability in connection with its products or this Limited Warranty.
What is Covered?
Subject to the terms, exclusions and limitations herein and with respect only to products first sold in the United States, Omix-ADA®/Rugged Ridge warrants to the initial retail purchaser ("purchaser") only that when installed and used on purchaser’s vehicle according to supplied product installation instructions and/or warnings, purchaser’s Omix-ADA® product and family of brands (Rugged Ridge, Alloy USA, Havoc, Precision Gear, Outland Automotive) shall be free of defects in material and workmanship for five (5) years. This Limited Warranty shall be measured from the date of initial retail purchase, extends only to the initial retail purchaser and is not transferable. ALL OTHER EXPRESS OR IMPLIED WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Your warrantor for these parts is Omix-ADA®. Omix-ADA® reserves the right to: (a.) require proof of purchase as a condition of this Limited Warranty please use warranty registration card, (b.) make future revisions to this product or it’s Limited Warranty without obligation to conform existing product or provide purchaser with prior notice.
